FS30 High Speed Disperser

Introduction:
FS30 High Speed Disperser  is achieved by "saw tooth" mixing blade which rotating at high speed.
The blade imparts high shear forces to raw materials. By choosing proper
blade size, the raw materials will be repeatedly mixed in the tank
until reach a proper fineness. After that, turn materials into bead mill
to grind further until to idea grinding fineness.
There
are various models such as FS5.5, FS7.5, FS11, FS15, FS18.5, FS22,
FS30, FS37, FS45, FS55, FS75. All bead mills are adopting dynamic gap
separator.
Mark Introduction:
1) "FS"-Degold high speed disperser
2) "Y"-hydraulic lifting, "Q"- pneumatic lifting
3) "B"-Explosive electric cabinet and control panel      
    
ATTN: There is only hydraulic lift from FS30 to FS75.
FS30 High Speed Disperser Specifications:
1) Main motor power: 30kW (Ex)
2) Dispersing rotation speed: 0-1200rpm
3) Stroke: 1400mm
4) Production capacity: 1500L, take water as example
5) Dispersing disc diameter: 350mm
6) Dimension: Lenght: 2120mm, Width: 900mm, Height: 2200mm
7) Weight: 2000kg

AC drive control speed. You can choose FS30Y,  FS30YB according to your special requirements.

KeyWords:

China High Speed Disperser ,Solvent Based High Speed Paint Disperser ,High Speed Disperser Machine ,Liquid High Speed Disperser ,Hydraulic High-speed Disperser ,High Speed Disperser Blade

CM Mixer Discharge-Station

Categories: Assistant Machine
Machine Type:Coating Machine


Detailed Info
Discharge-station for CM seires automatic container mixer:

Description:
Discharge-station of CM series mixer is used for dust-free unloading of the silo of CM series volumetric container mixers. It features in that the transmission rack with silo can directly slide from the blender to the unloader.

All the functions of discharge station(such as interlinking transmission rack, lifting unloading connection elements and opening discharging valve) will be pneumatically driven, which is not only minimizes work volume, but also ensure fully discharging with vibration motor, even for materials with poor fluidity.

KeyWords:

Discharge Station ,Chill Roller ,Assistant Machine ,Remote Feeding Device ,CM Mixer Discharge-Station ,Metal Detector

CZS Zirconium Silicate Beads

Categories: Grinding Medium
Model:CZS-64
Machine Type:Mill
Product Type:Paint
ZrO2 Composition:64%

CZS zirconium silicate beads are shaped in electrolyte solution and hardened at a high temperature in kiln. Compared to electrofused zircon beads and the similar others,they have homogenous microstructure and no air pockets. This give them 1/2 lower beads wear rate than the others. The middle density and hardness features are suitable for grinding slurry in viscosity from low to middle.The small sizes are the high quality blasting and peening media.


Features:
☆High crushing strength: Homogenous micro structure ~ Lower bead wear;
☆Higher gravity: Special composition ~ Higher density ~ Higher efficiency.
☆High sphericity: 96% sphericity ~ Better fluid ~ Higher through put;
☆No air pockets: Free from fragile beads ~ Easy change colors;
☆Smooth surface: Deeply polished surface ~ Easy wash; lower wear of contacted parts of mills;
☆Narrow sieving: 0.1mm tolerance ~ Lower bead wear; narrower distribution particles of grinded material.

KeyWords:

Zircon Beads ,Grinding Beads ,Grinding Medium ,Grinding Zircon Beads ,64% Zircon Beads ,Zirconia Beads

FS7.5 High Speed Disperser

Categories: High Speed Disperser

Model:7.5kW

Machine Type:Dispenser

Product Type:Paint

Main Motor Power:5.5kw

Introduction:

It is achieved by "saw tooth" mixing blade which rotating at high speed. The blade imparts high shear forces to raw materials. By choosing proper blade size, the raw materials will be repeatedly mixed in the tank until reach a proper fineness. After that, turn materials into bead mill to grind further until to idea grinding fineness.

There are various models such as FS5.5, FS7.5, FS11, FS15, FS18.5, FS22, FS30, FS37, FS45, FS55, FS75. All bead mills are adopting dynamic gap separator. 

Mark Introduction:

1) "FS"-Degold high speed disperser

2) "Y"-hydraulic lifting, "Q"- pneumatic lifting

3) "B"-Explosive electric cabinet and control panel 

ATTN: There is only hydraulic lift from FS30 to FS75.

Specifications:

1) Main motor power: 7.5kW (Ex)

2) Dispersing rotation speed: 0-1500rpm

3) Stroke: 1200mm

4) Production capacity: 400L, take water as example

5) Dispersing disc diameter: 250mm

6) Dimension: Lenght: 1655mm, Width: 570mm, Height: 1880mm

7) Weight: 1155kg

AC drive control speed. You can choose FS7.5Y, FS7.5Q, FS7.5YB, FS7.5QB according to your special requirements.

KeyWords:

High Speed Disperser Blade ,Hydraulic Lifting High Speed Disperser ,Liquid High Speed Disperser ,Wide Range High Speed Dispersers ,Industrial Production High Speed Disperser ,High Speed Disperser Machine

ZM20S Horizontal Bead Mill

Categories: Bead Mill
Model:20 L
Machine Type:Mill
Product Type:Paint
Container Volume:20l


Detailed Info

ZM20S Horizontal Bead Mill Features:
•Concise construction.
•Superfine grinding result.
•Ex motor.
•Ordinary electrical cabinet.
•Double mechanical seal.
•Water spiral in the grinding cylinder.
•Abrasive agitator discs, Cr12MoV or ceramic.
•Diaphragm pump or mechanical pump.
Technical Data:
•Main motor power: 18.5kW
•Grinding container volume: 20L
•No. of agitator discs: 9
•Production capacity: 50-200kg/h
•Weight: 980kg
•Dimension (L×W×H)mm: 1600×1050×1550

ATTN: The production capacity of the mill depends on the product being processed, and the actual numbers may be lower or higher.

KeyWords:

Paint Horizontal Bead Mill ,Horizontal Bead Mill Manufacturers ,Horizontal Bead Mill Exporter ,Internal Cooling Bead Mill,Ultra Beads Mill ,High-viscosity Universal Bead Mill

ZM1.4D3321 Lab Use Bead Mill

Categories: Lab Bead Mill
Model:ZM1.4D3321
Machine Type:Mill
Product Type:Paint
Cylinder Volume:1.4L


ZM1.4D3321 Lab Use Bead Mill
The lab bead mill is special for the formulation and grinding beads testing before large scale production.
ZM1.4D3321 lab bead mill is not only suitable for the lab testing but also for the small batch production.

ZM1.4D3321 bead mill Features:
•Superfine grinding result.
•Mechanical seal, dynamic gap separator.
•Grinding chamber and machine body are stainless steel.
•Grinding container is easy to dismantle for cleaning and new formula exchange.
•Spiral water cooling jacket.
•Gear pump.
•Transducer control grinding shaft rotary speed.
•Inner grinding cylinder material: mold steel
•Grinding discs material: mold steel.
•Seal: single mechanical seal

Technical data:
•Effective grinding cylinder volume: 1.4L
•Motor power: 2.2kW (Ex motor)
•Power supply: 380/220V, 50/60Hz
•Grinding shaft rotary speed: 0~@800r/min
•Adjustable range of materials flow: 0~1L/min
•Max. cooling water consumption: 0.5t/hr
•Productivity: 2~20kg/hr
•Dimensions: 650mm*570mm*885mm
•Net weight: 500kgs.

KeyWords:

Paint Horizontal Bead Mill ,Horizontal Bead Mill Manufacturers ,Horizontal Bead Mill Exporter ,Lab Grinding Mill ,Lab Pearl Mill ,Horizontal Bead Mill For Lab Use

ZM0.3 Lab Sand Mill

Categories: Lab Bead Mill
Model:ZM0.3
Machine Type:Mixer
Product Type:Paint
Volume:0.3liter


Detailed Info
ZM0.3 sand mill is your best choice for R&D in paint, pigment etc. industry.

The lab sand mill is also used for beads testing too. There are two kinds lab sand millS. The one is Non Ex and the other one is Ex proof. Ex proof means the motor and the electric cabinet and control panel on the sand mill are Ex proof. Ex proof sand mill is suitable for the raw materials with flammable characteristics.

The ZM0.3 lab sand mil is equipped with the lip seal to ensure the seal effectiveness.
The raw materials inside the ZM0.3 lab sand mill is circulated automatically.

ZM0.3 Lab Sand Mill Features:

• It solves requirement of R&D before large scale production. low to high viscosity products can be ground and produced.
• Superfine grinding result. The final fineness can reach less than 1μm.
• Small batches (from 0.4L to 4L) can be processed in a continuous operation.
• It adopts zirconium beads.
• Grinding chamber and machine body are stainless steel.
• The whole enclosed grinding unit can be separately and rapidly disassembled, cleaned and even sterilized.
• Ex motor.
• Self contained pumping system, which makes it easier for lab testing and cleaning.

ZM0.3 Lab Sand Mill Specifications:
• Effective grinding cylinder volume: 0.3L
• Motor power: 0.75kW (Ex motor)
• Power supply: 380/220V, 50/60Hz
• Grinding shaft material: alloy steel hardened steel
• Grinding discs material: Cr12MoV
• Grinding chamber material: stainless steel
• Seal: lip seal

KeyWords:

Sand Mill ,Lab Coating Mixer ,Lab Pearl Mill ,Lab Bead Mill ,Lab Grinding Mill ,Horizontal Lab Mill